How should I choose a contractor?

Compare written scopes, verify licences and insurance, check recent references and ask who completes each trade’s work. Listings are not endorsements and are not ranked by payment.

Are rebates available?

Eligibility depends on the current programme, property, equipment and application timing. Verify directly with the official programme before installation; no rebate is guaranteed.

Can a heat pump provide heating and cooling?

A suitable reversible heat pump can do both. The contractor must assess the home, equipment performance and any backup-heating requirements.

Do I need a 200-amp upgrade?

Not automatically. An electrician must assess demand and proposed loads. Existing capacity or suitable load management may be options; a panel change is not the same as increasing utility service capacity.

How long will installation take?

Timing depends on scope, equipment, permissions, utility coordination and contractor availability. Ask for a schedule in the written proposal; submitting a request does not reserve a date.

Who arranges permits?

Ask the contractor to identify the required permits, responsible applicant and inspection process for your address. Strata permission, where needed, is a separate requirement.

How many quotes should I compare?

Where available, compare two or three written proposals with equivalent scope. Retrofit Network may share a consented request with up to 3 contractors, but cannot guarantee three responses.

What is excluded from the online range?

The model is before tax and rebates. Confirm equipment supply, permits, utility/service work, access, building repairs and concealed conditions in a contractor’s official written estimate. Actual costs can fall outside the displayed band.

Ductless Mini-Split Installation in Vancouver, BC

For initial 2026 planning, ductless mini-split installation in Vancouver is modelled at $3,000–$6,000 CAD before tax and rebates. This is an estimate, not a contractor quote.

Guide updated September 2026 · Pricing bands compiled July 2026

See my estimate Request contractor quotes

Just want a ballpark first? Get an instant price range — free, no contact info needed.

What this planning range covers

Heat pump — ductless mini-split (single zone). CAD before tax and rebates. Combined totals add separate project allowances; they are not package quotes. Confirm utility/service work, permits, equipment supply and exclusions in writing. Panel allowance does not guarantee a complete service upgrade.

Existing July 2026 editorial bands; no unsupported regional uplift. Reviewed September 2026.

Planning estimate only — pricing is not guaranteed. Displayed amounts are approximate, not contractor quotes, bids or offers. Actual costs may fall outside the range. A contractor must assess your property and provide an official written estimate or quote before you agree to proceed. The contractor’s written terms govern pricing, inclusions, exclusions and changes. Retrofit Network does not guarantee costs, rebate eligibility, rebate payments or energy savings.

Plan the installation around your Vancouver home

A detached house with an existing furnace needs a different proposal from a condo heated by baseboards. Start by describing which rooms need heating and cooling, where the equipment can go and how a contractor can reach that location. Ask whether reusing existing ducts is appropriate after assessment; their presence alone does not establish that they will deliver the airflow a new system needs.

For a narrow lot, side-yard placement deserves an early conversation. Ask for the proposed outdoor unit location on a sketch showing windows, walkways, neighbouring properties and maintenance access. In rainy coastal conditions, drainage and defrost-water handling should be part of the design discussion rather than an afterthought. Equipment should remain serviceable without obstructing a normal access route.

Bring your driveway into the heating conversation

If an EV is already in your driveway, share its charging arrangement and your future plans with the electrical contractor. A heat-pump quotation that ignores an existing charger may leave important scope unresolved. Ask whether an assessment supports both loads and whether load management is suitable before assuming a larger electrical service is necessary.

Condo and townhouse owners should establish who controls the proposed outdoor location and electrical supply before requesting a final installation price. Ask the strata about its approval process and documents, and give the contractor that information. A rebate programme’s contractor registration does not replace property permission, electrical assessment or local permit requirements.

Make quotes comparable

Give each contractor the same brief: your home type, current heating, known electrical service, preferred equipment location and any other upgrades planned in the next year. Ask what the price assumes, what needs a site visit and which costs remain provisional. Keep equipment model numbers and permit responsibilities in writing so that a lower total does not hide a smaller scope.

After an assessment, review the contractor’s official estimate or quote and its terms before authorising work. Ask about commissioning, maintenance access and warranty responsibilities. Programme registration, a directory listing and a completed online form do not establish that a particular installation is approved, funded or booked.

Contractor listings serving Vancouver

Ashton Service Group

Serving Vancouver, BC

View profile →

All contractors and source checks

Frequently asked questions

How should I choose a contractor?: Compare written scopes, verify licences and insurance, check recent references and ask who completes each trade’s work. Listings are not endorsements and are not ranked by payment.
Are rebates available?: Eligibility depends on the current programme, property, equipment and application timing. Verify directly with the official programme before installation; no rebate is guaranteed.
Can a heat pump provide heating and cooling?: A suitable reversible heat pump can do both. The contractor must assess the home, equipment performance and any backup-heating requirements.
Do I need a 200-amp upgrade?: Not automatically. An electrician must assess demand and proposed loads. Existing capacity or suitable load management may be options; a panel change is not the same as increasing utility service capacity.
How long will installation take?: Timing depends on scope, equipment, permissions, utility coordination and contractor availability. Ask for a schedule in the written proposal; submitting a request does not reserve a date.
Who arranges permits?: Ask the contractor to identify the required permits, responsible applicant and inspection process for your address. Strata permission, where needed, is a separate requirement.
How many quotes should I compare?: Where available, compare two or three written proposals with equivalent scope. Retrofit Network may share a consented request with up to 3 contractors, but cannot guarantee three responses.
What is excluded from the online range?: The model is before tax and rebates. Confirm equipment supply, permits, utility/service work, access, building repairs and concealed conditions in a contractor’s official written estimate. Actual costs can fall outside the displayed band.